Effluent
Treatment Plants
OCEANIC
effluent treatment plants are available to treat various types of
industrial effluents and sewage, to produce treated water within
prescribed standards by various state Pollution Control Boards for
disposal on land for irrigation or in surface waters.
Industrial
Waste
BAR
SCREEN CLARIFIERS
OIL SKIMMER FLOCCULATORS
AERATION GRIDS SLUDGE HANDLING EQUIPMENTS
PUMPS/BLOWERS CHEMICAL DOSING SYSTEMS
BUBBLERS/DIFFUSERS TERTIARY TREATMENT PLANTS
MIXERS / AGITATORS SURFACE AERATORS (FIXED / FLOATING)
OCEANIC's expert process design gives optimum values
for capital cost and operating cost to maintain pH. oil/grease.
BOD.
COD. TSS. TDS etc. within prescribed levels. 
OCEANIC
has following special equipments to suit specific needs of industries.
Floating
Oil Skimmers.
Floating Surface Aerators.
Mercury Removal Systems.
Chemical Reaction based plants for removal of chromium, lead etc.
OCEANIC also offers equipments for Air Pollution.
Bag
Filters
ESP
Mist Eliminators
Gas scrubbers
Fume extraction system etc.
DOMESTIC WASTE SEWAGE TREATMENT PLANTS
BAR
SCREEN CLARIFIERS
OIL SKIMMER FLOCCULATORS
AERATION GRIDS SLUDGE HANDLING EQUIPMENTS
PUMPS/BLOWERS CHEMICAL DOSING SYSTEMS.
BUBBLERS/DIFFUSERS TERTIARY TREATMENT PLANTS.
MIXERS / AGITATORS SURFACE AERATORS (FIXED / FLOATING)
Package Sewage Plant
For
treating municipal sewage, or sewage generated by large colonies,
Hotels, Hospitals and institutions / commercial buildings, 'OCEANIC'
offers compact sewage treatment plants.
The
treated effluent water can be further polished through Tertiary
stage comprising filteration plant and Softeners to produce clean,
clear and hardness free water for reuse in the industries for Cooling
Tower make up and gardening purpose.
When
the Sewage Treatment and Effluent Treatment became statutory requirement
of all the State Pollution Control Boards, everybody, whether a
Hotelier or Industrialist were looking for economical, easy to install
and operate compact type Effluent Treatment Plant. Since the land
is extremely expensive, very few industries could afford the large
treatment units as recommended by most of the Consultants. These
large units were designed on the theoretical knowledge mainly.
OCEANIC
being pioneer in the field was always in the search of some technology
by which the need of the industries and Hotels can be easily satisfied.
After
years of research, we have now developed a Compact and Versatile
Effluent Treatment Plant, which can treat upto 100 cu. mt/day of
efflent or sewage with inlet BOD of around 300 mgs/lit. The entire
plant is package unit which is skid mounted and can be installed
near to the effluent receiving underground tank. This is the only
underground tank which client has to provide at site to collect
the raw sewage/effluent. After treatment, the treated water can
be reused for gardening or can be disposed off Onland irrigation.
The area occupied by the plant is only 5 M x 2 M (10 sq. mt.). The
power requirement is only 7.5 HP(5.2 kw).
Principle
of Treatment:
The
package plant employs all the treatments of Aerobic system, which
is conventional and proven throughout the world. This includes:
-
Aeration by air sparger.
-
Coagulation.
-
Quick setting/ sedimentation using inclined Tube Settler.
-
Filteration through sand filter.
-
Chlorination (optional).
-
It includes Secondary and Tertiary Treatment Plant.

-
High efficiency and large treatment capacity.
-
Compact arrangement saves installation space.
-
Pre assembled design save installation cost.
-
Minimum maintenance cost.
-
Low power consumption.
-
Full line of standardized equipment for quick delivery.
Applications:
-
Sewage Treatment by Hotel Industries producing 100 cu. mt. of
waste.
"We can also make this package plant of any capacity."
-
Industrial Effluent Treatment with the increase in the inlet BOD
level, the flow will reduce proportionately, for e.g, if the inlet
BOD is 5 mg/lit, the output will be 60 cu. mt./day.
-
If the aeration portion is removed from this plant, it can be
used as Drinking Water Treatment Plant for rural area.
Treatment
Process Schematic:

Outline
of the process:
The
effluent generated at various points is collected in an underground
tank after screening. For sewage the points does not need much of
the adjustment but for Industrial effluent, if required, pH should
be adjusted in the neutral range by adding lime / dilute acid. The
aeration grid is provided with the package plant for sparging compressed
air with the help of the Blower. The aerated effluent is continuously
pumped to the ITS, where alum is also dosed with the help of Metering
Pump. The settled biomass at the bottom of the hopper is recycled
back to the aeration tank and the clear effluent flow by gravity
to the Gravity Sand Filter, which produces clear water. The Inclined
Tubes provided in the ITS also helps in removing BOD due to the
film formation of bacteris from the inner surface which comes in
contact with aerated effluent and act as a Polisher and tremendously
help in reducing the BOD level. The pre wired Control Panel is provided
to operate all the motors from one point.
Back |